• Chain tensioning system
    The chain tensioning system is used with the special key included in the electric jigsaw set. The chain is stretched by changing the distance between the driven and driving sprockets, which allows you to reliably fix the tire with the necessary tension. The advantage of this system is a more reliable fixation of the tire, and also for longer work the chain is less susceptible to weakening.
  • Bus and chain
    It is equipped with an electric jigsaw with a 406mm bus. It is a flat metal structure along which the cutting chain moves. The length of the bus is measured in millimeters or inches. Also the size of the bus affects what kind of trunk the operator can cut in one step. When choosing a spare bus and chain, take into account the chain pitch and groove size under it. To ensure the rated load, it is recommended to install a bus with a length of no more than 16 inches.
  • Engine

    It is equipped with an electric motor with the use of a copper winding, which makes it possible to obtain a large power with small dimensions. To increase the service life and protection from external damage, the winding of the electric motor is covered with a special lacquer, which protects the winding from damage. For greater reliability, the varnish coating passes in several stages, the lacquer is applied in three layers, thus, besides the protection, the likelihood of varnish peeling decreases and decreases the likelihood of a current breakdown.

  • Operator’s safety
    When working with electric jigsaw, the main thing is the safety of the operator. A special electronic chain brake is installed in the electric jigsaw. When the operator releases the power button, the circuit immediately stops. In addition to this protective function, a front guard is installed in the jigsaw. The task of frontal protection is to secure the operator in the case of a collision of the tip of the bus with a solid object or a chain failure. At the moment of collision, the tool is suddenly thrown back or the chain is ejected. In this case, front protection will help protect the hands of the operator.
  • Quick brush replacement function
    The quick brush replacement function provides quick access to the brush assembly, allowing you to replace the worn brushes with new ones without contacting service centers or disassembling the tool. To replace the brush, it is necessary to unscrew the cover of the brush compartment, remove the old worn brush, and replace it with a new one. Timely replacement of worn brushes increases tool service life. This procedure takes only a couple of minutes.
id: 00073
A feature of the Тех.АС TA-03-229 electric saws is the function of warning about the overload of the electric motor. The installed indicators will promptly notify the user at the time of overload and will allow the operator to reduce the load to prevent the tool from breaking. The soft start function is installed for smooth operation. This function not only makes it easier to start working, but also prevents premature wear of rotating components.

Characteristics
Мodel n/a
System nominal voltage (W) n/a
Network rated frequency (Hz) n/a
Power rating (W) n/a
Number of free movement rotations (m/s) n/a
Length of guide plate (mm) n/a
Pitch of chain n/a
Weight (kg) n/a
Warranty (mon) n/a