Main page Rotary hammers

Rotary hammer Tex.AC ТА-01-303

Chuck

The chuck for the perforator is designed in such a way that the operator can quickly change the tooling without making long stops during the work. The key difference of the chuck in the perforator from the drill is in the shank of the drill used. There is a SDS + chuck in the puncher and special drills, drills and other accessories with a suitable shank are used for such a chuck.
Operational mode

The mechanism of switching functions in the perforator allows you to work in one of three modes. The first mode is designed for drilling building materials. The second one is used for chiseling. With the help of the third mode, the perforator can be used to drill various materials where the impact mechanism is not required.
Impact mechanism

The impact mechanism is the most important function of any perforator, which distinguishes it from the rest of the instrument. This perforator is equipped with an electro-pneumatic impact mechanism, thanks to which the tool receives significant impact energy with minimal engine size. The operation of the electro-pneumatic mechanism occurs when the perforator is pressed against the work surface.
Engine

An important role is played by an electric motor, for reliability and durability in an electric motor only a copper winding is used. All layers of the winding are impregnated with a special varnish. This greatly improves the electrical and mechanical quality of insulation, increases resistance to heat, moisture resistance and improves thermal conductivity. To ensure a high protection of the electric motor, a protective varnish coating is applied in several layers, providing high protection against mechanical damage.
Equipment

The puncher is equipped with a case with various compartments for storage of accessories for comfortable transportation and storage. Also, to increase the comfort of the tool, an additional handle comes in the kit, which reduces the load from the hands during work. It is very important to always have at hand the necessary equipment, in a set with a perforator supplied drills of three diameters, a peak and a chisel.

id: 00050

Tex.AC TA-01-303 rotary hammer is a universal tool designed for intensive use. Vertical arrangement of the electric battery ensures reliable operation of the tool. An improved vibration reduction system is used, which reduces the load on the hands of the operator. The body and internal parts are made of high quality alloys, which significantly extend the operational service of the perforator.

Characteristics
Мodel	ТА-01-303
System nominal voltage (W)	220
Network rated frequency (Hz)	50
Power rating (W)	1300
Energy of blow (J)	5
Cartrige type	SDS+
Number of stokes (min)	0-4500
Diameter of concrete drilling (mm)	26
Infinitely variable speed control	no
Power cable length (cm)	n/a
Weight (kg)	n/a
Warranty (mon)	24