• Working mode
    In Tech. TA-01-352 perforator there used three main modes, allowing you to perform such jobs as drilling, chiseling, drilling various building materials. There is also an additional mode that allows you to expose the rigging at the necessary angle for the work of the chipping surfaces, such as basting tiles, screeds and a number of other construction works.
  • Control system
    The installed power button allows you to work with the necessary comfort, depending on the degree of depression of the button, the number of revolutions increases or decreases. Convenience is added by the release switch, designed to fix the work of the perforator, ensuring continuous work, without holding the button.
  • Chuck

    The chuck for the perforator is designed in such a way that the operator can quickly change the tooling without making long stops during the work. The key difference of the chuck in the perforator from the drill is in the shank of the drill used. There is a SDS + chuck in the puncher and special drills, drills and other accessories with a suitable shank are used for such a chuck.

  • Reverse
    Located on the case of the rotary reverse provides a change of polarity, changing the direction of rotation of the shaft. Most rotary hammers with a horizontal motor layout are equipped with this reverse switching system. The main advantage of such a system is the ease of work and reliability. This type of reverse switching is durable by its own principle, sufficiently low probability of failure, high maintainability.
  • Engine

    An important role is played by an electric motor, for reliability and durability in an electric motor only a copper winding is used. All layers of the winding are impregnated with a special varnish. This greatly improves the electrical and mechanical quality of insulation, increases resistance to heat, moisture resistance and improves thermal conductivity. To ensure a high protection of the electric motor, a protective varnish coating is applied in several layers, providing high protection against mechanical damage.

  • Gearbox
    The impact mechanism is made of quality components capable of withstanding high loads. The power parts are made of a special alloy, ensuring a long service of the tool. A high-quality lubricant is used in the power units of the perforator to ensure reliable operation. As a result, the impact mechanism works without failures, providing the tool with the necessary energy for performing all kinds of construction work.
  • Equipment
    The puncher is equipped with a case with various compartments for storage of accessories for comfortable transportation and storage. Also, to increase the comfort of the tool, an additional handle comes in the kit, which reduces the load from the hands during work. It is very important to always have at hand the necessary equipment, in a set with a perforator supplied drills of three diameters, a peak and a chisel.
id: 00051
Tex.AC TA-01-352 rotary hammer is designed to perform intensive repair work. The stator and the battery rotor are made of high quality components. Three-layer coating varnish winding, protects the tool from overheating and short circuit. The qualitative assembly of the impact mechanism ensures maximum endurance, as well as resistance to heavy workloads.

Characteristics
Мodel ТА-01-352
System nominal voltage (W) 220
Network rated frequency (Hz) 50
Power rating (W) 1200
Energy of blow (J) 3,8
Cartrige type SDS+
Number of stokes (min) 0-5500
Diameter of concrete drilling (mm) 26
Infinitely variable speed control yes
Power cable length (cm) 280
Weight (kg) 3.2
Warranty (mon) 24