• Display
    An electronic display is placed on the front panel to display the exposed current that provides a comfortable definition of the necessary current during welding. Optimum exposed current will allow inexperienced welders to perform better work, reaching the best parameters of metal welding and joint integrity, reducing the likelihood of burning metal structures.
  • Bayonets
    The bayonets made of high-quality materials are used for reliable connection of welding cables. This type of connectors has been specifically designed to meet safety and reliability standards. The used format of bayonet ensures a tight connection of the contacts, reducing the resistance of the current being conducted, allowing the use of welding cables of increased length.
  • Device settlement
    The welding machine is equipped with air cooling, consisting of a fan blower and a radiator system located in places where a high heat sink is required. The installed fan passes the right amount of air through the inverter, ensuring timely cooling of internal components. The inverter is equipped with an overheating protection to ensure reliable operation, which turns off the inverter automatically. The device can be switched on again after cooling to the required operating temperature. Components from world manufacturers are use, in power pulse technology to increase the working cycle. The power units of the welding machine are coated with a compound designed to protect and reduce the likelihood of electrical breakdown. The main board is covered with a layer of varnish, providing additional protection from external damage.
  • Network
    An advanced welding set system allows performing of welding by connecting an inverter to a 140W network. This refinement made it possible to expand the field of application of the welding inverter. The operator is not limited in the choice of the connected network. Such a system will be useful for welders performing welding work from electric generators on the off-premise.
  • Equipment
    The welding inverter is equipped with a mass clamp and an electrode holder. Cables are used with the optimum cross-section, designed for high-current operation, increasing the endurance of welding. Also, the welding set is equipped with a shoulder strap for carrying or performing work at height.
id: 00021
Tex.AC TA-00-101 D welding set is a modern and compact inverter. The range of adjustable welding current is set from 20 to 250 A. The installed digital display, which demonstrates the exposed current, facilitates the work of the operator. At maximum performance, the inverter consumes 6.4 kW, and the active cooling system provides a working cycle of 60%.

Characteristics
Мodel ТА-00-101 Д
Display yes
Current adjustment range (A) 20-250
Used electrodes (mm) 1,6-4,0
Power rating (kWn) 6,4
Working cycle (%) 60
System nominal voltage (W) 140-250
Length of mass cable (cm) 200
Length of electrode adapter cabel (cm) 215
Class of case protection IP21S
Dimensions L/H/W (mm) 260/105/145
Weight (kg) 2,9
Warranty (mon) 36
Equipment n/a