• Display
    Electronic display is designed to display the exposed current, provides comfort during welding. When a welding inverter is operated in a domestic environment, it is very important to monitor its performance all the time to avoid breakage and failure of the welding machine.
  • Bayonets
    Bayonet unit is a fastening system for connecting welding cables with an inverter. The plugs have been specifically designed to meet all safety and reliability standards. The format of the 35-50 bayonet provides a large contact area, which allows high currents to flow.
  • Network
    The welding machine fully performs welding operations when connected to a network of 140-250W, provides a wide range of applications without binding to specific networks. It carries out welding works from all types of electric generators thanks to modern technologies allows boiling the device from a network of 140W.
  • Device settlement
    The device is cooled by a fan that passes through the inverter housing the proper amount of air. Protection from overheating ensures the operation of systems that disconnect the device. The fan blower is then operated until the system cools down. As a result, the better the device will be cooled, the longer you can work without interruption for cooling the inverter. The welding machine is equipped with transistors from world manufacturers, ensuring reliable operation of the inverter. In addition to basic protection, the main board is covered with additional varnish layers, providing additional protection against external damage. Power units are protected by a layer of compound, designed to protect and reduce the likelihood of a breakdown in the power units.
  • Equipment
    The welding inverter is equipped with a mass clamp and an electrode holder. Cables are used with the optimum cross-section, designed for high-current operation, increasing the endurance of welding. Also, the welding set is equipped with a shoulder strap for carrying or performing work at height.
id: 00029
Tex.AC TA-00-353 welding set is designed for manual metal arc welding. The system used there is the latest generation of welding current stabilization, which ensures stable current parameters when the arc is changed. This is necessary for uniform heating of the metal for a quality welded seam. The LED display shows the set current, allowing you to comfortably carry out a smooth adjustment.

Мodel ТА-00-353
Display yes
Current adjustment range (A) 30-310
Used electrodes (mm) 1,6-5,0
Power rating (kWn) 7,5
Working cycle (%) 80
System nominal voltage (W) 140-250
Length of mass cable (cm) 300
Length of electrode adapter cabel (cm) 320
Class of case protection IP21S
Dimensions L/H/W (mm) 322/120/170
Weight (kg) 4,0
Warranty (mon) 36
Equipment n/a