• Bayonets
    The bayonets made of high-quality materials are used for reliable connection of welding cables. This type of connectors has been specifically designed to meet safety and reliability standards. The used format of bayonet ensures a tight connection of the contacts, reducing the resistance of the current being conducted, allowing the use of welding cables of increased length.
  • Network
    The welding machine fully performs welding operations when connected to a network of 140-250W, provides a wide range of applications without binding to specific networks. It carries out welding works from all types of electric generators thanks to modern technologies allows boiling the device from a network of 140W.
  • Device settlement
    The device is cooled by a fan that passes through the inverter housing the proper amount of air. Protection from overheating ensures the operation of systems that disconnect the device. The fan blower is then operated until the system cools down. As a result, the better the device will be cooled, the longer you can work without interruption for cooling the inverter. The welding machine is equipped with transistors from world manufacturers, ensuring reliable operation of the inverter. In addition to basic protection, the main board is covered with additional varnish layers, providing additional protection against external damage. Power units are protected by a layer of compound, designed to protect and reduce the likelihood of a breakdown in the power units.
  • Equipment
    The case is made of high-quality polymers, ensuring the integrity of the welding machine during transportation and storage. Welding cables with an optimal cross-section are designed to perform high current operations, increasing the time interval for welding operations. Also, the welding set is equipped with a shoulder strap for carrying or performing work at height.
id: 00002
A reliable transportation case is included in the set of the Tex.AC TA-00-005 C welding device. The inverter is designed to perform regular welding operations of medium intensity. Adjustable welding current intensity range from 20 to 250A allows working with electrodes up to 4mm. The working cycle of the tool is 60%, which means a continuous operation for 6 minutes.

Characteristics
Мodel ТА-00-005 К
Display no
Current adjustment range (A) 20-250
Used electrodes (mm) 1,6-4,0
Power rating (kWn) 6,4
Working cycle (%) 60
System nominal voltage (W) 140-250
Length of mass cable (cm) 155
Length of electrode adapter cabel (cm) 185
Class of case protection IP21S
Dimensions L/H/W (mm) n/a
Weight (kg) 3,6
Warranty (mon) 36
Equipment n/a