• Display
    Electronic display is designed to display the exposed current, provides comfort during welding. When a welding inverter is operated in a domestic environment, it is very important to monitor its performance all the time to avoid breakage and failure of the welding machine.
  • Bayonets
    The bayonets made of high-quality materials are used for reliable connection of welding cables. This type of connectors has been specifically designed to meet safety and reliability standards. The used format of bayonet ensures a tight connection of the contacts, reducing the resistance of the current being conducted, allowing the use of welding cables of increased length.
  • Network
    The welding machine fully performs welding operations when connected to a network of 140-250W, provides a wide range of applications without binding to specific networks. It carries out welding works from all types of electric generators thanks to modern technologies allows boiling the device from a network of 140W.
  • Device settlement
    The device is cooled by a fan that passes through the inverter housing the proper amount of air. Protection from overheating ensures the operation of systems that disconnect the device. The fan blower is then operated until the system cools down. As a result, the better the device will be cooled, the longer you can work without interruption for cooling the inverter. The welding machine is equipped with transistors from world manufacturers, ensuring reliable operation of the inverter. In addition to basic protection, the main board is covered with additional varnish layers, providing additional protection against external damage. Power units are protected by a layer of compound, designed to protect and reduce the likelihood of a breakdown in the power units.
  • Equipment
    The welding inverter is equipped with a mass clamp and an electrode holder. Cables are used with the optimum cross-section, designed for high-current operation, increasing the endurance of welding. Also, the welding set is equipped with a shoulder strap for carrying or performing work at height.
id: 00015
Modern trends of welding equipment production were taken into account while designing the Tex.AC TA-00-008 welding set. The components from the best manufacturers specializing in the production of power components have been installed. The use of the latest generation of IGBTs ensures a reliable and long service life of the welding machine.

Мodel ТА-00-008
Display yes
Current adjustment range (A) 20-300
Used electrodes (mm) 1,6-5,0
Power rating (kWn) 7,5
Working cycle (%) 80
System nominal voltage (W) 140-250
Length of mass cable (cm) 155
Length of electrode adapter cabel (cm) 185
Class of case protection IP21S
Dimensions L/H/W (mm) n/a
Weight (kg) 3,6
Warranty (mon) 36
Equipment n/a